| SMSI 2020 |
D4.1 Optical microphone-based acoustic response analysis for non-contact non-destructive testing |
W. Rohringer, G. Kaniak, F. Lücking, N. Panzer, B. Fischer - XARION Laser Acoustics GmbH, Vienna (Austria) |
| SMSI 2020 |
D4.2 Condition Monitoring of Machine Elements using Magnetoresistive Sensors |
R. Slatter - Sensitec GmbH, Lahnau (Germany) |
| SMSI 2020 |
D4.3 Inline Inspection of Ceramic Tape Casting Processes by Means of Optical and Eddy Current Methods |
T. Härtling, M. Heymann, S. Münch, M. Schulze - Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden (Germany), B. Capraro, D. Schabbel, A. Vogel - Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf (Germany) |
| SMSI 2020 |
D4.4 Characterization of Sand and Sand-Binder Systems from the Foundry Industry with Impedance Spectroscopy |
L. Bifano, A. Fischerauer, G. Fischerauer - Universität Bayreuth (Germany), A. Liedtke - Michenfelder Elektrotechnik, Mainz (Germany) |
| SMSI 2020 |
D4.5 Non-destructive validation method for understanding water uptake processes of moldings in electronic packaging |
P. Gierth, L. Rebenklau, U. Gierth, U. Langklotz, M. Schneider - Fraunhofer IKTS, Dresden (Germany) |
| SMSI 2020 |
D5.1 An Approach for Feature Interpolation Between Classes to Simplify Calibration of Sensor Systems for Odour Monitoring |
J. Joppich, M. Bastuck, A. Schütze, T. Sauerwald - Saarland University, Saarbrücken (Germany) |
| SMSI 2020 |
D5.2 Robust Optimization of Self-x Sensory Electronics in Presences of Environmental Variations for Industry 4.0 |
Q. Zaman, S. Alraho, A. König - Technische Universität Kaiserslautern, Kaiserslautern (Germany) |
| SMSI 2020 |
D5.3 Three-directional Drift Correction Method Based on Iterative Closest Point (ICP) Algorithm |
J. Degenhardt, G. Dai - Physikalisch-Technische Bundesanstalt, Braunschweig (Germany), R. Tutsch - Technische Universität Braunschweig, Braunschweig (Germany) |
| SMSI 2020 |
D5.4 Compensation of Strong Aberrations with a Time Reversal Virtual Array for Ultrasound Imaging |
L. Grüter, R. Nauber, C. Kupsch, J. Czarske - TU Dresden, Dresden (Germany) |
| SMSI 2020 |
D6.1 Determination of Murnaghan constants of plate-shaped polymers under uniaxial tensile load |
S. Johannesmann, S. Becker, B. Henning, M. Webersen - Paderborn University, Paderborn (Germany) |
