| SMSI 2021 |
D3.4 The Analysis and Correction of Transfer Function of Film Measuring Transducers of the Microwave Power |
P. Neyezhmakov - National Scientific Centre “Institute of Metrology”, Kharkiv (Ukraine), I. Zakharov - Kharkiv National University of Radioelectronics, Kharkiv (Ukraine) |
| SMSI 2021 |
D3.5 Development of a Low-Cost Sensing Node with Active Ventilation Fan for Air Pollution Monitoring |
N. Winkler, P. Neumann, H. Kohlhoff, J. Erdmann - Bundesanstalt für Materialforschung und -prüfung, Berlin (Germany), E. Schaffernicht, A. Lilienthal - Örebro University, Örebro (Sweden) |
| SMSI 2021 |
D5.1 Image-Based Predictive Maintenance Concept for Inkjet Printing of Ceramic Inks |
P. Bischoff, C. Zeh, C. Schuster, T. Härtling - Fraunhofer Institute IKTS, Dresden (Germany), C. Kroh - Senodis Technologies GmbH, Dresden (Germany) |
| SMSI 2021 |
D5.2 Use of Adaptive Learning Algorithms in Linear Position Measurement Applications |
A. Voss, A. Bartos - TE Connectivity Sensors Germany GmbH, Dortmund (Germany) |
| SMSI 2021 |
D6.1 Topography Analysis in the NPMM-200 |
E. Meta, E. Manske - Technische Universität Ilmenau, Ilmenau (Germany) |
| SMSI 2021 |
D6.2 Mechanical Design of a New Dynamic Force Transfer Standard |
S. Hassan, C. Schlegel, R. Kumme - Physikalisch-Technische Bundesanstalt, Braunschweig (Germany), R. Tutsc h - TU Braunschweig, Braunschweig (Germany) |
| SMSI 2021 |
D6.3 Thermographic Stall Detection Using Model-Based Evaluations of the Surface Temperature Response to Oscillating Fluid Temperatures |
F. Oehme, M. Sorg, A. Fischer - University of Bremen, Bremen (Germany) |
| SMSI 2021 |
D6.4 Monitoring Inkjet Printer Condition via Image Analysis of Printed Patterns |
C. Zeh, P. Bischoff, M. Rjelka, C. Schuster - Fraunhofer Institute IKTS, Dresden (Germany), T. Härtling - Technische Universität Dresden, Dresden (Germany) |
| SMSI 2021 |
D8.1 Investigation of a Mitigation Strategy for Thermal Effects of X-ray Sources in Computed Tomography |
F. Binder, B. Baumgärtner, T. Hausotte - Friedrich-Alexander-University Erlangen-Nuremberg, Erlangen (Germany) |
| SMSI 2021 |
D8.2 Influence of Continuous Scan Mode and Workpiece Positioning on Dimensional Measurements with Computed Tomography |
C. Orgeldinger, F. Wohlgemuth, T. Hausotte - Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen (Germany) |
