| SMSI 2021 |
D2.4 Evaluation of Precision of Measurement Results in Medical Laboratory |
A. Tumilovich, A. Chunovkina, D. Mendeleyev - Institute for Metrology, St. Petersburg (Russia), T. Martynova - Academician I.P. Pavlov First St. Petersburg State Medical University, St. Petersburg (Russia) |
| SMSI 2021 |
D3.1 IoT-middleware Requirements for Context-sensitive Processing of Data to Enable Predictive Maintenance through Augmented Reality |
M. Jensen - University of Applied Sciences, Stuttgart (Germany) |
| SMSI 2021 |
D3.2 Simultaneous Signal Acquisition by Synchronous Detection of Orthogonal Frequency Components |
M. Baer, B. Schmauss - Erlangen Graduate School for Advanced Optical Technologies, Erlangen (Germany), P. Demosthenous - Cyprus Research & Innovation Center Ltd., Nicosia (Cyprus) |
| SMSI 2021 |
D3.3 Approximate Sequential Bayesian Filtering to Estimate Rn-222 Emanation from Ra-226 Sources from Spectra |
F. Mertes, S. Röttger, A. Röttger - Physikalisch-Technische Bundesanstalt, Braunschweig (Germany) |
| SMSI 2021 |
D3.4 The Analysis and Correction of Transfer Function of Film Measuring Transducers of the Microwave Power |
P. Neyezhmakov - National Scientific Centre “Institute of Metrology”, Kharkiv (Ukraine), I. Zakharov - Kharkiv National University of Radioelectronics, Kharkiv (Ukraine) |
| SMSI 2021 |
D3.5 Development of a Low-Cost Sensing Node with Active Ventilation Fan for Air Pollution Monitoring |
N. Winkler, P. Neumann, H. Kohlhoff, J. Erdmann - Bundesanstalt für Materialforschung und -prüfung, Berlin (Germany), E. Schaffernicht, A. Lilienthal - Örebro University, Örebro (Sweden) |
| SMSI 2021 |
D5.1 Image-Based Predictive Maintenance Concept for Inkjet Printing of Ceramic Inks |
P. Bischoff, C. Zeh, C. Schuster, T. Härtling - Fraunhofer Institute IKTS, Dresden (Germany), C. Kroh - Senodis Technologies GmbH, Dresden (Germany) |
| SMSI 2021 |
D5.2 Use of Adaptive Learning Algorithms in Linear Position Measurement Applications |
A. Voss, A. Bartos - TE Connectivity Sensors Germany GmbH, Dortmund (Germany) |
| SMSI 2021 |
D6.1 Topography Analysis in the NPMM-200 |
E. Meta, E. Manske - Technische Universität Ilmenau, Ilmenau (Germany) |
| SMSI 2021 |
D6.2 Mechanical Design of a New Dynamic Force Transfer Standard |
S. Hassan, C. Schlegel, R. Kumme - Physikalisch-Technische Bundesanstalt, Braunschweig (Germany), R. Tutsc h - TU Braunschweig, Braunschweig (Germany) |
