| AMA Conferences 2013 |
A1.1 - Electrical Strain Gauges, Piezoelectric Sensors or Fiber Bragg Sensors for Force Measurement: Prospects and Potentials |
T. Kleckers - Hottinger Baldwin Messtechnik GmbH, Darmstadt (Germany) |
| AMA Conferences 2013 |
A1.2 - Force/Torque measuring facility for friction coefficient and multicomponent sensors |
S. Baumgarten, D. Röske, H. Kahmann, D. Mauersberger, R. Kumme - Physikalisch-Technische Bundesanstalt (PTB), Braunschweig (Germany) |
| AMA Conferences 2013 |
A1.3 - Patterning of thin film strain gauges on 3D-surfaces |
O. Suttmann, J. Duesing, J. Koch, U. Stute, L. Overmeyer - Laser Zentrum Hannover e.V., Hannover (Germany) |
| AMA Conferences 2013 |
A1.4 - Increasing demand for ever-higher nominal torque valuesby the example of a marine application |
M. Haller - Hottinger Baldwin Mestechnik GmbH, Darmstadt (Germany) |
| AMA Conferences 2013 |
A2.1 - High-G and High Bandwidth Characterization of Piezoresistive MEMS Accelerometers for Crash Test Applications |
S. Kühne, T. Kiko, C. Cavalloni - Kistler Instrumente AG, Winterthur (Switzerland), U. Lang - Lucerne University of Applied Sciences and Arts, Horw (Switzerland), R. Theurillat, R. Leine - Center of Mechanics, Zurich (Switzerland) |
| AMA Conferences 2013 |
A2.2 - Sensory characteristics of carbon fiber based strain sensors and integration techniques into textile reinforced structures for in situ monitoring of thermoplastic composites |
E. Haentzsche, A. Nocke, A. Matthes, C. Cherif - Dresden University of Technology (Germany) |
| AMA Conferences 2013 |
A2.3 - U-Shaped Wire Based Resonators for Viscosity and Mass Density Sensing |
M. Heinisch, E. Reichel, B. Jakoby - Johannes Kepler University, Linz (Austria) |
| AMA Conferences 2013 |
A2.4 - Capacitive Sensors from Low Cost to High Resolution on Printed Circuit Boards |
A. Bülau, A. Schwenck, K. Fritz, H. Kück - HSG-IMAT, Stuttgart (Germany) |
| AMA Conferences 2013 |
A3.1 - Phononic Crystals and Applications |
R. Lucklum, M. Zubtsov, A. Oseev - Otto-von-Guericke-University, Magdeburg (Germany), M. Schmidt, S. Hirsch - Teprosa GmbH, Magdeburg (Germany), F. Hagemann - SAW Components Dresden GmbH, Dresden (Germany) |
| AMA Conferences 2013 |
A3.2 - Design, modeling and identification of an ultrasonic composite transducer for target impedance independent short pulse generation |
F. Bause, J. Rautenberg, B. Henning - University of Paderborn (Germany) |
